Seyeon FW1170 Manual de usuario Pagina 31

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 48
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 30
Live view, playback & control
through NVR
(video, audio & data)
Router
FW-5071
Browsers
Internet
Network Diagram
POS/ATM,
Video Analytics,
Serial device
Flex
Technical Specifications
5071 Network Video Recorder
Video channels 1 ~ 8 IP cameras HDD management
Disk full notification / Periodic notification via e-mail
HDD error notification via e-mail
HDD error notification using beep sound (for local area notification)
IP camera Brand
FlexWATCH, Axis, Mobotix, Panasonic is supported now.
Arecont vision, IQinVision, and Vivotek, etc.
Please make sure the supported compression format according to the
brand
Security
Channel based user password protection for live-cast, PTZ, alarm output
and audio
Recording
storage
Supports up to 1.5TB HDD by 1 SATA (After update Firmware 4.0)
Anti-vibration & air-cooling system
Dynamic IP
support
Dynamic IP service using www.ipcctvdns.com
Recording
[Video Recording]
MJPEG / MPEG-4 / H.264
Max 120 fps at D1 resolution
[Audio Recording]
G.723 (4-bit, 8KHz), ADPCM IMA and so on
[Data Recording]
POS, ATM, Video Analytics, Access Control and various serial devices
Please make sure the recording streams according to the brand
Software
(default Web
interface)
Live-cast, PTZ control, search and playback through Web browser
(Minimum PC requirement - XP, 2000, Vista / IE 6.x or later / Pentium III
500 MHz or above or equivalent AMD / 64MByte RAM or above)
Live Casting 8 channels of video, audio and data
Software
(Multi-NVR Player)
Optional (freeware available)
Search and playback video with audio from registered NVR
(Minimum PC requirement - XP, 2000, Vista / IE 6.x or later / Pentium III
500 MHz or above or equivalent AMD / 64MByte RAM or above)
* All specifications are subject to change without prior notice
Bandwidth
Management
Frame rate control / Bandwidth control
Software
(FW-Manager
3.xx)
Supports 16, 25, 36, 64, 128, 256ch
Full-featured PC NVR with matrix functionality
( Minimum PC requirement - XP, 2000 / Pentium IV 1.6GHz or above /
256MByte RAM or above / 64MByte video memory or above )
Recording
condition
Based on the multiple combination of date / time / alarm using ‘AND’ &
‘OR’ condition
Alarm can be generated by motion detection and by a trigger from
digital inputs
[Protocol]
HTTP, TCP/IP, ARP, ICMP, Telnet, Ftp, PPPoE, SMTP, DHCP, NTP, uPNP,
and ETC
[SDK]
Open HTTP API / ActiveX for live-cast with audio, playback, & PTZ
System
Integration
Features
[Service]
Image upload / notification service / special service for POS integration
Recording
frame rate
2 step frame rate (fast on event / Slow on continuous recording mode)
Up to 120 fps at DI (23 KB) when simplex
Installation and
maintenance
Configuration: installation wizard, HTTP, telnet and console.
Upgrade firmware: HTTP, telnet & ftp
Search
Based on the multiple combination of date / time / event using ‘AND’ &
‘OR’ condition
Misc. Support NTP server
Playback
Forward, reverse, fast forward, fast reverse, single step forward, single
step backward
System hardware 32bit RISC CPU / Embedded Linux / 128MByte SDRAM / 8MByte Flash
Synchronized
playback
8 channels can be played simultaneously Power
Power Supply - SMPS 12V (5A) [AC100~240V, 50/60Hz]
Power Consumption - DC12Volt, Normal : 1.0 Peak : 1.8
Backup
Video data can be backed up to a remote computer
In AVI format / FJP format (FlexWATCH AV clip format)
Approvals FCC, CE, RoHS
PTZ support
Built-in PTZ device protocol with more than 30 different PTZ protocols
from Pelco, Vicon, Kalatel, Sony, Panasonic, Canon, Honeywell, etc
All 8 channels support PTZ controls
Proxy Supported
All Interface to network device through only one standard Web Interface
- Video Proxy
- Audio Proxy
- PTZ Proxy
- DI/DO Proxy
LAN 10/100/1000-base-T Ethernet Interface
Dimension /
Weight
140 (W) x 224 (D) x 44(H) (in mm)
0.95Kg (2.1lbs) without Power Supply & HDD
UART support
Console, By-pass command to control UART device
X10 device command to control device over power line, Modem
Support ( ISDN, PSTN and GSM )
Working
Environment
Temperature : 41~122 F (5~50
O
C)
Humidity : 20~80% RH
31
Vista de pagina 30
1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 47 48

Comentarios a estos manuales

Sin comentarios