Seyeon FW1170 Manual de usuario descargar pdf (Pagina 17)

Technical Specifications

1170 Network Camera

Video Encoding MJPEG / H.264 (simultaneous dual stream)

[Protocol]

HTTP, HTTPS, RTP/RTSP, Multicast, 3GPP, TCP/IP, ARP, ICMP, Telnet, Ftp,

PPPoE, SMTP, DHCP, NTP, uPNP, and ETC

[SDK]

Open HTTP API / ActiveX for live cast with audio & PTZ

System

Integration

Features

[Service]

Image upload / notification service / special service for POS integration

Video channels Built-in BT-656 Video Signal

Installation and

maintenance

Configuration: installation wizard, HTTP, telnet and console.

Upgrade firmware: HTTP, telnet & ftp

Resolution

ccessory

POE module

Sold separately

* All specifications are subject to change without prior notice.

VGA - 640x480

CIF – 320x240

QCIF – 160x120

Misc.

Transmit serial input data with video

Support NTP server

Quick Time & VLC media player compatible for live view

Live Casting

Streaming 1 video channels with full duplex live audio

Up to max 30fps@ VGA when simplex

System hardware 32bit RISC CPU / Embedded Linux / 128MByte SDRAM / 8MByte Flash

Audio

Encoding

8 bit PCM, Sampling rates 8KHz, Mono Audio Power

Power Supply - SMPS 12V (800mA) [AC100~240V, 50/60Hz]

Power Consumption – DC12Volt, 600mA

Audio channels 1ch audio-in & 1ch audio-out Approvals MIC,FCC, CE, RoHS

PTZ support

Built-in PTZ device protocol with more than 30 different PTZ protocols from

Pelco, Vicon, Kalatel, Sony, Panasonic, Canon, Honeywell, etc

Dimension /

Weight

64 (W) x 113 (D) x 47 (H) (in mm)

0.16Kg without Power Supply

UART support

Console, By-pass command to control UART device

X10 device command to control device over power line, Modem Support

( ISDN, PSTN and GSM )

External

Interface

10/100-Base-T Ethernet (auto-sensing)

1 photo-coupled or 1 digital inputs (NC/NO selectable), 1 relay outputs

1 PIR Input

1 audio output

1 serial port (COM: RS-232)

Bandwidth

Management

Frame rate control / Bandwidth control / CBR / VBR

Working

Environment

Temperature : 32~122 F (0~50

Humidity : 20~80% RH

Alarm

Management

(for 1 analog

channels)

[ Trigger Condition ]

Video loss / Video recovered / Motion detection (144 area) /

1ch alarm inputs / Boot finished / Serial input / Schedule

[ Alarm Service ]

Image holding service (Max 15.5MByte pre-post alarm buffer)

Image upload service through E-mail / FTP (support pre & post)

Notification service through TCP / UDP / HTTP / 1 alarm outputs

Image sensor

1/4 inch optical format CMOS type

Sensitivity : 1500 mV/lux.sec

MAX Active pixel resolution: 652x488

S/N ratio: 46dB

White Balance: AWB

Security

Channel based user password protection for live-cast, PTZ, alarm output

and audio

Lens

FOCAL LENGTH : 4.3mm

BACK FOCAL LENGTH : 6.3mm

APERTURE : F2.0

ANGLE OF VIEW : 78’, 61’ (Diagonal)

Dynamic IP

Support

Dynamic IP service using www.ipcctvdns.com

LENSE(MANUAL)

No Iris Control

Image

Setting

Software

(default

Web interface)

Live-cast, PTZ control, search through Web browser

(Minimum PC requirement - XP, 2000, Vista / IE 6.x or later )

Minimum

illumination

4-10000 lux

Software

(FW-Manager 3.xx)

Supports 16, 25, 36, 64, 128, 256ch ( 9ch freeware available)

Full-featured PC NVR with matrix functionality

( Minimum PC requirement - XP, 2000 / Pentium IV 1.6GHz or above /

256MByte RAM or above / 64MByte video memory or above )

Power Over

Ethernet

IEEE 802.3af Built-in wireless(optional)

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 47 48

Comentarios a estos manuales

Sin comentarios

Seyeon FW1170 Manual de usuario Pagina 17

Comentarios a estos manuales

Relacionado con productos y manuales para Cámaras De Seguridad Seyeon FW1170